BMW Mini OBD2 Scanner Full System – ABS-Airbag-SAS-BMS-DPF

£105.00

The BMW/Mini is a handheld OBD2 scan tool that will allow you to access all the functions and diagnose problems on your BMW or Mini just like the dealer can. Allowing you to access all modules such as engine, transmission, and ABS systems for faults. With special features such as Oil Light Service reset, DPF regeneration, Battery management reset & registration, SAS, etc. It will also work on all cars 2006+ (BMW/Mini early models from 1987+) to check engine faults and clear them, so you can use it on other models of cars. With an easy-to-read colour screen and simple to use interface, it is easy for anyone to use.

  • Stand-alone unit – Plug & Play
  • Works on all BMW & Mini Models 1987+
  • Works on all petrol cars 2002+ and all diesel cars 2007+ for engine faults & data
  • Special Functions for BMW & Mini – DPF, BMS etc
  • Easy to read colour screen
  • Retrieve all fault codes and clear all check lights
  • Rugged design, good for the workshop or home
  • Latest software
  • Easy to use
  • 12-Month Warranty

Express Shipping = 2 – 3 Days for £6.00
Free Shipping = 3 – 8 Days.

Out of stock

BMW Scan Tool & Mini Scan tool is an easy-to-use, stand-alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBDII port and the device will boot up with step-by-step instructions. This scanner has a large, easy-to-read colour display accompanied by a user-friendly interface that requires no additional software making this the best BMW Scan Tool and Mini Scan Tool every owner needs to have.

This scanner will allow you to access ALL vehicle systems on BMW and Mini vehicles including engine, transmission, ABS/DSC, Airbag, Body systems, etc. You can now read/reset BMW/Mini specific codes and read live data from vehicle systems. As a bonus, the scanner is equipped with full OBDII capabilities that allow you to scan all engine readings and related trouble codes (check engine light) on ANY Brand vehicle make/model 2002+ (for petrol) and 2007+ (for diesel). With BMW and MINIS it can cover the older models and the newer models. Check the coverage list below.

OBD2 Functions Include:

1. Read Codes
2. Erase Codes
3. I/M Readiness — I/M Readiness indicates whether the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the onboard computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s onboard computer.
7. On-Board Monitoring — This function can be utilised to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. EVAP System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information about the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes
11. Turn off Check Engine Light (MIL), clear codes, and reset monitors
12. Read live PCM data stream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search

Special Functions for BMW & Mini:

Oil, Service, Brake Service Reset Function

Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset

Battery Check and Registration

Register the battery replacement, this is a MUST-DO JOB, failing to do so may create an overcharging situation, shorten the battery life, and/or enable limp-home mode

EPB Reset Function

Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly recalibrate the vehicle. This tool will offer you that capability on supported models. Deactivate to Service Position – Replace – Re-activate.

ECTS Reset Function

After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). This tool will perform Electronic Throttle Body adaptations on supported vehicles.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The ABS System mainly uses the signal not only as part of its stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.

DPF Regeneration or Replacement

Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles – this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot.

ABS/AIRBAG:

Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieve ABS/SRS ECU information, etc.

Supported models

  • 1 Series, Chassis systems: E81/E82/E87/E88 and F20/F21/F52 (2017-present)
  • 2 Series, Chassis systems: F22/F23/F45/F46/ F87 (2015-present)
  • 3 Series, Chassis systems: E30 (1982-1994)/ E36 / E46/ E90/ E91/E92/E93/ F30/F31/F34/F35/ F80 / G20 (2018-present)
  • 4 Series, Chassis systems: F32/F33/F36/F82/F83;
  • 5 Series, Chassis systems: E28 (1981-1988) / E34 (1988-1996)/E39/E60/E61/F07/F10/F11/F18/F90 (2017-present)/G30/G31 (2017-present) and G38 (2017-present)
  • 6 Series, Chassis systems: E24 (1976-1989)/E63/E64/F06/F12/F13/G32 (2017-present)
  • 7 Series, Chassis systems: E23 (1977-1987) / E32 (1986-1994)/E38/E65/E66/E67/E68/F01/F02/F03/F04/G11/G12 (2015-present)
  • 8 Series, Chassis systems: E31 (1990-1999)/G14/G15/G16 (2018-present)
  • X Series, Chassis systems: X1 E84 /F48 /F49 (2011-2017) / X2 F39 (2018-present) / X3 E83 / F25 / G01 (2018-present) / X4 F26 /G02 (2018-present) / X5 E53 / E70, F15 / F85 /G05 (2018-present) /X6 E71 /E72 / F16 / F86 /X7 /G07 (2018-present)
  • Z Series, Chassis systems:Z1 E30 (1990-1999)/ Z3/E36/Z4/E85/E86/Z4/E8/Z8/E52
  • I Chassis systems: I3/I01/I8/I12
  • MINI: MINI_R50/R52/R53,MINI_R55/R56/ F60 (2017-present)
  • Include: Drive, Chassis and Body all system
  • MINI: R series and F series of Chassis systems Rolls-Royce: All of RR Chassis systems 7910 support systems: CAS, DDE, DME, EGS, MRS/ACSM, ABS/DSC, IHKA, KOM/INSTR, EMF, etc.

 

FAQ’s

How do I use this?

This BMW Scan tool is a stand-alone unit that is very easy to use, as you just need to plug it into your cars OBD2 port. You will find this most likely under the steering wheels or on the inside kick panel by the accelerator pedal. You just need to plug it in and click go on the scan tool as it is powered from the cars OBD2 port. It takes just 1 minute to set up.

Will it work on my model?

In the list above, you can see there is a wide coverage from 1987 to the present, so most likely yes it will work on your BMW or Mini. If you have an older BMW, you may have the 20-pin connector under the bonnet. Here, you will need our 20-pin to OBD2 adaptor cable which is here.

What are special functions? 

These are service procedures you need a tool if you want to do a number of service functions on your BMW. For example, when you put a new battery on newer models, you need to “tell” the car’s ECU to treat it like a new battery. If you do not do this, it will reduce the life of your battery.

Kits include:

OBD2 BMW Scan Tool Main Unit, OBD 16PIN Cable, User Manual, USB Cable, Protective Hard Case.

Reviews

There are no reviews yet

Add a review
BMW Mini OBD2 Scanner Full System – ABS-Airbag-SAS-BMS-DPF BMW Mini OBD2 Scanner Full System – ABS-Airbag-SAS-BMS-DPF
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review