VW & Audi OBD2 Scan Tool Full System


  • Stand Alone Unit – Plug & Play
  • Retrieve All Fault Codes & Clear Check Lights
  • Works with All VW & Audi 1994+
  • Special Functions for VW & Audi – ABS Bleeding, BMS, DPF etc
  • Clear & Reset Service Reminders
  • Easy To Read Colour Screen
  • Professional Level Scan Tool
  • Rugged Design Good For The Workshop
  • Latest Software – Lifetime Free Updates
  • Easy To Use
  • 12 Month Warranty
  • Australian Support

Express Shipping = 2 – 3 Days for £6.00
Free Shipping = 3 – 8 Days.


2 in stock

OBD2 Scanz FST32 VW & Audi handheld OBD2 scan tool will allow you to access all the functions and diagnose problems on your VW or Audi like a professional. Allowing you to access engine, transmission, ABS and all other systems for faults.

With special features such as Oil Light Service reset, ABS Bleeding, battery management reset & registration, DPF Regeneration, SAS etc. It is a must have tool for any VW or Audi owner with the technology these newer cars have and if you are doing any work on them yourself or drive a-lot of KMs.

With an easy to read colour screen and simple to use interface it is easy for anyone to use. Without a tool like this you cannot do your own maintenance as you cannot release brakes, prime fuel system etc. Will also work on other brands of cars for a basic OBD2 engine scan to check and clear faults and read data.


The VW & Audi OBD2 Scan Tool is an easy to use, stand alone unit that will have you scanning your vehicle like a pro within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read colour display accompanied by a user friendly interface that requires no additional software. If you are a VW or Audi owner then this is a must have tool to keep under the seat or in the glove box. Without a tool like this you cannot reset all service lights, change a battery, release brakes for brake change and much more.

This scanner will allow you to access ALL VW & Audi vehicles modules systems including:

  • Engine
  • Transmission
  • Airbags
  • Body Systems
  • Radio
  • Plus More

Special Features include:

  • Oil Service Reset
  • Steering Angle Reset
  • Electric Parking Park Release for replacing brake pads
  • Battery Management System for replacing battery
  • DPF Regneration and Reset
  • Throttle Position Sensor Reset and Adjust
  • TMPS Reset and Relearn (Tyre Pressure Monitoring System)
  • Fuel Injector Coding
  • Fuel system priming for replacing fuel filter

You will be able to read/reset VW & Audi specific codes as well as read live data from vehicle systems. It is a must have for any Audi or VW owner as there are a number of tasks that you need to have a scan tool for. Like changing the battery or replacing the brake pads.

Special FUNCTIONS for VW & Audi include:

Oil, Service, Brake Service Reset Function

Reset the engine oil, Carry out the CBS Reset, Exhaust emission inspection, Coolant Service Reset, Spark plugs Reset, Brake fluid Service Reset, Micro-filter Service Reset

Battery Check and Registration

Register the battery replacement, this is a MUST DO JOB, failing to do so may create an over charging situation, shorten the battery life and/or enable limp-home mode

EPB Reset Function

Brake Pad / Shoe changes on vehicles equipped with EPB’s (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. This tool will offer you that capability on supported models. De-activate to Service Position – Replace – Re-activate.

SAS Reset Function

The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it’s stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.

If the Steering Angle Sensor (SAS) needs to be changed, many vehicle’s require the new sensor to be calibrated. This tool will allow you to carry out steering angle re-calibration on supported models.


Diagnose ABS/SRS system codes, read and clear DTCs and turn off ABS/SRS warning light, retrieves ABS/SRS ECU information, etc.

Throttle Position Sensor Reset 

DPF Regeneration or Reset (Diesel Particulate Filter) 

TPMS Reset 

Injector Coding 

Note that these special features and functions may not be available on all models. Please get in touch with us first to ensure supportability.

Kits Includes:

  • Main Unit
  • OBD 16PIN Cable
  • User Manual
  • USB Cable (For software Updates)
  • Protective  Case.


Some features may not be available on some models and makes. Please get in touch with us first to ensure compatibility when in doubt. A special software update is and may be required to enable some features and functions. Returns and refunds due to incompatibility (without or against OBD2 Australia advise, or refusal to execute troubleshooting) will be subject to our Returns Policy/Terms.


There are no reviews yet

Add a review
Currently, we are not accepting new reviews